Here you can find all supportive documents and technical information you will need for your VacPack VS series. Check out How-To Videos, Operator Manuals, FAQs and more!
Please log in to view machine documents.
Yes. All our Emplex & VacPack machines allow for recipe creation. You can create and save recipes with desired temperature, speed and pressure for different product runs and materials. Our Vacpack equipment also always you to save number and length of cycles. For step-by-step insturctions on how to program in a recipe to your machine check out this article.
There are two ways to log into a machine: as a technician or as an engineer. The difference is in the level of access assigned to these two user profiles.
Technicians will have access to load or save existing recipes and change machine configuration and operating parameter.
Engineers will have full access to machine configuration and parameters.
To learn how to login with these user profiles check out this article:
To change a machine parameter on your Emplex machine, simply edit the Set Value of the respective parameter on the parameter screen.
Learn more
If you are experiencing issues with the HMI screen on your machine or are seeing concentric circles appear on the HMI screen, you may need to calibrate the HMI screen to restore correct function.
If the status screen on your machine is showing a negative temperature this could be a problem with the thermocouple wires in the PLC. To learn more on correcting this issue read this article:
If the seal bars are not heating up there could be a problem with the electrical connections to the sealing section.
Read more here:
Yes. Check out the article in our help center linked below to find a step-by-step guide on starting up the VS1.
If you are noticing your packages are melting or burning when you seal them you could have your sealing temperature set too high, in which case try reducing the set temperature. If you are still experiencing this issue check if the seal bands are exposed, if they are the Telfon blinds may be damaged and should be replaced.
Yes, our equipment feautres modular designs meaning there are many ways to modify and build up your machine as your needs change.
We offer upgrade kits that allow you to add additional nozzles to your VacPack system. For more information contact [email protected].
Already have extra nozzles but don't know how to install them? Check out this step-by-step guide: